Products Description
In industrial production, the correct use of graphite electrodes is crucial for their performance and ensuring production safety. Below will be a detailed introduction to the usage instructions of it.
Firstly, we need to screw the electrode hanger (preferably made of graphite material) into the electrode hole on the other end of the spare electrode. The choice of graphite material for lifting equipment is reasonable because graphite has good conductivity and high temperature resistance, which matches the characteristics of it and can better adapt to the working environment, reducing problems caused by material mismatch.
When lifting electrodes, this is a step that requires extra caution. We must pad a soft object under one end of the spare electrode joint to prevent ground damage to the joint. As a crucial connection part of the electrode, if damaged, the joint may affect the effectiveness and stability of the entire electrode. Then, insert the hook into the lifting ring of the lifting device and lift it. During this process, the electrode must be lifted steadily. We must make every effort to avoid the electrode loosening from the B end or colliding with other fixed devices due to shaking, as any collision may cause damage to the electrode and affect its subsequent use.
Next, hang the spare electrode above the electrode to be connected, which requires precise operation. To align with the electrode hole and slowly drop it, it is like a delicate surgery that requires patience and caution. Next, rotate the spare electrode to lower the spiral hook and electrode together. This step may seem simple, but it actually requires precise control to ensure that the electrode can be smoothly connected to the electrode to be connected.
When the end faces of the two electrodes are 10-20mm apart, there should be no carelessness at all. It is necessary to clean the exposed parts of the two end faces and joints of the electrodes again with compressed air. This detail is crucial because any small impurities can affect the connection quality and conductivity of the electrode.
When put down the electrodes
And when completely lowering the electrode at the end, special attention should be paid. Do not use too much force, otherwise violent collisions may cause damage to the threads of the electrode holes and joints. Imagine, it's like gently putting down a precious item, requiring gentleness and caution.
Finally, use a torque wrench to tighten the spare electrode until the end faces of the two electrodes are in close contact. There is a key criterion here, which is that the correct connection gap between the electrode and the nip should be less than 0.05mm. This requires us to strictly control the force and angle during the operation process to achieve the best connection effect.
contact
ZHENAN INTERNATIOANL CO., LTD
Tell: +8615896822096 (WhatsApp)
Email: info@zaferroalloy.com
Website: www.metal-alloy.com
Address: Huafu Office Building, Anyang, Henan province, China.
Welcome to our company or factory for a visit!
Hot Tags: graphite electrode materials, China graphite electrode materials manufacturers, suppliers, factory, Efficient Ferro Silicon Aluminum Alloy Ball, Iron phosphorus solid, Ferro Silicon 75, Si al ferroalloy Lump, Ultrafine Silicon Powder 600mesh, Silicon Metal Powder 200 mesh