Vanadium Pentoxide Fused Flake – Large-Format V₂O₅
Fused vanadium pentoxide flake is the large-format V₂O₅ product: fused plate flake 20–80 mm wide and 2–8 mm thick, dense and low-dust, packed in 250 kg steel drums. Where your process wants minimal fines and clean handling, fused flake is the specification.
What Is Vanadium Pentoxide Fused Flake?
Fused flake is the large-format V₂O₅ product: fused plate flake rather than standard crushed flake. Grade follows the V₂O₅99/98/97 specification - see the vanadium pentoxide flake page for the full composition table and COA terms.
| Property | Value |
|---|---|
| Material | V₂O₅ (fused flake type) |
| Dimensions | Width 20–80 mm; thickness 2–8 mm |
| Packing | 250 kg steel drum |
| Function | Alloy additive / vanadium source |
Fused Flake vs Standard Flake: Which V₂O₅ Format Suits Your Furnace?
Same chemistry, different geometry - the format decision is a handling and charge-practice decision.
| Property | Fused Flake | Standard Flake |
|---|---|---|
| Dimensions | 20–80 mm wide, 2–8 mm thick | Smaller crushed flake |
| Dust in transfer | Least | Low |
| Moisture pickup | Least | Low |
| Melting in reduction furnace | Fastest | Fast |
| Best for | Low-dust charge practice, large furnaces | General alloy-plant feedstock |
Why Choose Fused Vanadium Pentoxide Flake?
Fusing drives the material into dense plates: less dust in transfer, less moisture pickup, faster melting in the reduction furnace. For vanadium nitrogen alloy and ferrovanadium producers, that means cleaner charge practice and steadier vanadium recovery.
Where Is Fused Flake Used?
Ferrovanadium and FeVN production charge, vanadium chemicals, and any process specifying large-format low-dust V₂O₅ - including charge material for industrial ferrovanadium production.
How Is Fused Flake Quality Verified?
Lot analysis with COA; drum weights verified at packing; third-party inspection available.
Why Source Fused Flake from ZhenAn?
Manufacturer-direct fused V₂O₅ with drum weights verified at packing, COA per lot, and container loading plans available before dispatch.
What Do Fused Flake Buyers Ask Most?
What is the difference between flake and fused flake?
Fused flake is the larger plate format (20–80 mm) in drums; standard flake is the general alloy-plant feedstock. Both are fused V₂O₅.
How is fused flake packed?
250 kg steel drums, palletized for container loading.
What are the flake dimensions?
Width 20–80 mm, thickness 2–8 mm.
Why does low-dust matter?
Less dust in transfer means cleaner charge practice and steadier vanadium recovery in the reduction furnace.
Which grades are available?
All three refined grades - V₂O₅99, V₂O₅98 and V₂O₅97 - each with a COA per lot.
Can I get drum photos or pre-shipment inspection?
Yes - request drum photos and a container loading plan by email, or arrange pre-shipment SGS inspection through WhatsApp.
Request Drum Photos and a Container Loading Plan
See the material before you ship it: request drum photos, COA and a container loading plan for 250 kg drums by emailing market@zanewmetal.com. To arrange pre-shipment SGS inspection instead, message +86 155 1882 4805 on WhatsApp.








Hot Tags: vanadium pentoxide fused flake, China vanadium pentoxide fused flake manufacturers, suppliers, factory, Vanadium Ferroalloys Dark, FeV 80, Ferro vanadium Master Alloy, Ferro Vanadium 60, Industrial Ferrovanadium 40 Dark, FeV 80%






