One Of High Level Materials Aluminum Wire

A metal peeling machine for anti-oxidation of aluminum wire, it is a kind of equipment for cutting the metal surface of aluminum wire. The transmission shaft in the bearing seat of the machine is a hollow shaft, which has an aluminum wire passing through after cutting, a cutting power head is installed on the transmission shaft, and there are three tool holders that are 120 ° into each other on the cutter head of the power head, and the three tool turning angle vertices of the tool holder clamping are on the same round surface. The gas protection cover is a pipeline, which is sealed and connected with the transmission shaft, and argon is filled in the gas protection cover, so that the surface of the aluminum wire is not in contact with the air after cutting, and is not oxidized, and the unstable factors of the combination of the two metals of copper-clad aluminum are eliminated from the root, and a major breakthrough in the copper-clad aluminum cable industry has been realized.

1.An automatic device for aluminum wire drawing machine comprises a base, the right side of the upper surface of the base is fixedly provided with a pay-off frame, the inner side of the pay-off frame is provided with a reel, the reel is hinged with the pay-off frame through the bearing seat that is arranged at its two ends, the top of the pay-off frame is fixedly mounted with a top plate, the left side of the pay-off frame is provided with two vertical limiting rods that are parallel to each other, the left side of the vertical limiting rod is provided with a water tank, the inside of the sink is fixedly installed with a mold, the left side of the upper surface of the base is provided with a take-up frame, and the top of the take-up frame is fixedly connected with the top plate, The inside of the take-up frame is provided with a roller. The new type is used by setting up a pay-off frame, a water tank, a mold and a take-up frame, and the thick aluminum wire enters the mold after passing through the horizontal limit rod to draw fine, and then winds it on the bracket, and the pay-off and take-up are carried out at the same time, which can be used for small-scale production with low processing accuracy requirements, and the structure is simplified and automated, which can effectively improve the production efficiency and reduce the cost.

Hot Tags: one of high level materials aluminum wire, China one of high level materials aluminum wire manufacturers, suppliers, factory, Iron Vanadium, Industrial Silicon Powder 400 mesh, Silicon Carbide, Ferromolybdenum Powder, Molybdenum Wire Uses, Ferrophosphorus FeP24