High Carbon Ferro silicon Specification
The Ferro Silicon produced by ZhenAn is considered to be of high quality in the Chinese and international markets.
|
High Carbon Ferro Silicon |
|||||||
|
Model |
Chemical composition% |
||||||
|
Si |
C |
Fe |
Al |
Ca |
S |
P |
|
|
≥ |
≤ |
||||||
|
68 |
68 |
18 |
1.5 |
2 |
2 |
0.05 |
0.05 |
|
65 |
65 |
18 |
1.5 |
2 |
2 |
0.05 |
0.05 |
Size: 0-1mm,1-3mm,100mesh,200mesh,240mesh,300mesh,325mesh,or customized
Supply Ability: 3000 Metric Tons per month
Payment term: T/T OR L/C
Delivery time: Within 7 days after receiving prepayment
Service: We can supply you with free samples, a booklet, a laboratory test report, an Industry Report, etc.
Welcome to our factory and company for a visit!
Introduction to high carbon ferrosilicon
Introduction to high carbon FeSi
Carbon silicon alloy is a new type of alloy that can replace Iron Silicon, silicon carbide, and carburizer, and is used in the deoxidation alloying process of converter smelting.
High carbon Iron Silicon Alloy: At the end of converter steelmaking, too much oxygen is dissolved in the molten steel, which precipitates during the solidification process to form oxide inclusions and bubbles. The generated oxide inclusions are retained in the steel, which will reduce the mechanical properties of the steel such as plasticity and impact toughness. Excessive oxygen content in steel will also produce defects such as bubbles and subcutaneous looseness, aggravating the harmful effects of sulfur and directly affecting the quality of continuous casting billets and steel.
Before using high carbon Fe Silicon, the main method of deoxidation of steel smelted by steel mills was aluminum iron deoxidation. The advantage of aluminum deoxidation is that the aluminum grains are relatively fine and the deoxidation effect is very obvious, but the disadvantage is that the cost of aluminum iron deoxidation is high, and the aluminum deoxidizer is easy to form Al2O3 inclusions, resulting in water blocking or non-flow phenomenon. Therefore, the use of high carbon Silicon Ferro deoxidation method can not only reduce the deoxidation cost, but also solve the problems of water blocking and non-flow.
Packaging of High-Carbon Ferrosilicon Products
Packaging of High-Carbon Ferrosilicon Products:
Specification and particle size: Natural blocks, 10-100mm, powder, or customized according to customer requirements.
Packaging: Ton bag packaging (1000kg/bag) or customized according to customer requirements.
We uphold the principle of honest operation, establish long-term cooperative relationships with customers, and strive for common development and growth. In future cooperation, we will continue to improve and innovate to provide you with quality products and services. We look forward to cooperating with you. If you have any questions or needs about our products and services, please feel free to contact us. We hope that our cooperation can bring more benefits to both sides and achieve mutual benefit and win-win results.
Hot Tags: high carbon ferrosilicon 3-10mm, China high carbon ferrosilicon 3-10mm manufacturers, suppliers, factory, Customizable Ferro Silicon Aluminum Alloy Lump, Ferro Silicon Aluminum, Efficient Ferro Silicon Aluminum Alloy Block, High Density Ferro Silicon Aluminum Alloy Lump, milled ferrosilicon, ferro phosphorus FeP18 Granules