Silver Gray Ferrosilicon 75

If ferrosilicon is found to be slightly powdered when wet or damp, the powdered ferrosilicon should be quickly transferred to a dry and ventilated environment for storage. If ferrosilicon is found to be seriously powdered when wet or damp, quickly evacuate the personnel in the contaminated area to a safe area, isolate the leaked contaminated area, and strictly restrict entry and exit. Cut off the fire source. It is recommended that emergency response personnel wear self-priming filter dust masks and wear general work clothes. Small leakage: avoid dust, collect with a clean shovel in a dry, clean, covered container. Large leakage: cover with plastic sheeting or canvas to reduce scattering. Then collect and recycle or transport to a waste disposal site.

Store in a cool, ventilated, dry warehouse. Do not store in the open air. Relative humidity should be controlled below 75%. Do not store with strong acids, alkalis, or flammables. When stacking, choose a dry, high-lying warehouse with easy-to-control humidity and a cement floor. The bottom of the stack should be raised by at least 30 cm and the height of the stack should not exceed 3 meters. The warehouse safety environment should be checked regularly, especially on rainy days, and the warehouse should be checked for leaks. When the container is damaged, use repair agents to repair the broken barrels. It is absolutely forbidden to use soldering or electric welding. Load and unload gently during transportation to prevent collision and friction. It is absolutely forbidden to open and knock barrels in the warehouse. If large barrels are used for packaging and manual operation, people must stand in the middle of the barrels. It is strictly forbidden to stand at both ends of the barrels to prevent explosions and injuries. Due to the heavy weight of the packaging, it is best to use a manual cart or explosion-proof equipment for all operations to ensure the safety of personnel and warehouses.

Q:Can we get the some samples?Any charges?
A: Yes , we could offer the sample for free charge but do not pay the cost of freight . If you place the order after confirm the sample , we will refund your express freight or deduct it from the order amount .

Q: What is your terms of payment ?
A: 30% T/T deposit , 70% balance by T/T or L/C before shippment

Hot Tags: silver gray ferrosilicon 75, China silver gray ferrosilicon 75 manufacturers, suppliers, factory, manganese ferrosilicio Block, phosphorus iron solid, manganese ferrosilicio Lump Block, Iron phosphorus FeP21 powder, Reliable Ferro Silicon Aluminum Alloy Lump, phosphorus and iron powder