Ferro titanium 30% Made In China
ferrotitanium Lumps Parameters
| Ti | 68-72 | % min. |
| Al | 5.00 | % max. |
| V | 3.00 | % max. |
| O2 | 2.00 | % max. |
| C | 0.15 | % max. |
| S | 0.02 | % max. |
| P | 0.02 | % max. |
| Si | 0.50 | % max. |
| N | 0.50 | % max. |
| Sn | 0.50 | % max. |
| Ni | 0.50 | % max. |
| Cr | 0.50 | % max. |
| Pb | 0.010 | % max. |
| Bi | 0.010 | % max. |
Titanium Ferro specifications: 30/40/70 silver gray, 10-80mm Natural Block,, or customized to customer requirements.
Packing: waterproof, woven bag ton packing (1000KG per pack)
ferrotitanium Granules knowledge
The atomic weight of titanium is 47.90. The outer electronic structure is 3d4s. Melting point 1667℃. Boiling point 3285℃. Density (20℃) 4.5g/cm3. Titanium's chemical properties are relatively active and can form stable compounds with oxygen, nitrogen, sulfur, and carbon.
Ferrotitanium is used as deoxidizer, degassing agent and carbon-sulfur stabilizer in steelmaking. Titanium deoxidation is used in the production of killed steel, which can reduce segregation in the upper part of the steel ingot, improve the quality of the steel and increase the yield of the steel ingot.
Titanium and nitrogen dissolved in molten steel can be combined to form stable titanium nitride, which can eliminate the adverse effects of nitrogen on steel properties. Titanium and sulfur in the molten steel form titanium sulfide, which can eliminate the formation of iron sulfide that causes hot embrittlement. Titanium and carbon form extremely stable titanium carbide. The particles of titanium carbide can prevent the growth of steel grains, refine the structure of steel, and increase the strength of steel.
The 65 manganese iron blocks produced by ZarenAn is considered to be of high quality in the Chinese and international markets.
Hot Tags: ferro titanium 30%, China ferro titanium 30% manufacturers, suppliers, factory, Ferrotitanium 40, Ferrotitanium, Titanium Powder, Ferrotitanium 70