Super Quality Ferro Titanium

Super Quality Ferro Titanium

Super quality ferro titanium can be manufactured by mixing titanium sponge and scrap with iron and melting them together in an induction furnace. Our company can supply ferrotitanium of different grades.
Send Inquiry
Description

FeTi Introduction

 

The main raw materials for smelting high-quality ferrotitanium are titanium concentrate, titanium oxide powder, aluminum powder, lime powder and potassium chlorate, and their chemical composition is shown in Table 1. The potassium chlorate content used in the experiment is 99%, and the particle size is less than 1mm. The aluminothermic method directly reduces the smelting of high-quality ferrotitanium, and the oxygen content in the alloy is relatively high. It can be seen from the composition of the three alloys that with the appropriate increase in the amount of aluminum, the reduction rate of titanium increases and the oxygen content decreases relatively, but the aluminum content in the alloy increases, causing this phenomenon.

 

Some people think that it is due to the formation of Al2O3, which is difficult to remove in the alloy, but the author has found through scanning electron microscopy and energy spectrometer analysis that the alloy produced The composition is relatively uniform, and there is basically no separate Al and O inclusion phase, which means that Al and O exist in the alloy in other forms. It is generally believed that the incomplete reduction of TiO2 is the reason for the high oxygen content in the aluminothermic product. The product contains titanium oxide or forms a titanium oxide solid solution, which is very difficult to remove. The author has tried to use metal calcium as a reducing agent for re-reduction and to use metal calcium to replace part of the aluminum as a reducing agent, but the effect is not very good. As the amount of aluminum increases, the titanium reduction rate increases, and the aluminum content in the alloy also increases. It may be because aluminum and metal titanium form stable A-type intermetallic compounds.

 

FeTi Features

 

Trademark

ZhenAn

Product

Ferrotitanium

Ti 25-35% , 65-75%
Delivery Time 7-10 Days
HS Code 7202910000

Transport Package

1 Tons /Bags or as Your Request

MOQ

Negotiable

 

product-800-600

FeTi Package & Shipping

 

Package :We can provide all kinds of packing and size, including 1MT bag, iron drum, super sack, small bag, paper bag, wooden case.
China manufacturer Titanium alloy ferro titanium FeTi70 FeTi40 FeTi30 FerroTitanium.
Shipping:in 10 working days after received the deposit.

 

Hot Tags: super quality ferro titanium, China super quality ferro titanium manufacturers, suppliers, factory, Ferrotitanium 70, Ferrotitanium, Ferrotitanium 40, Titanium Powder