Chilean customer orders 523 tons of silicon carbide
ZhenAn is a company dedicated to the development, production, processing, and sales of ferro alloy products. With a workforce exceeding 200 skilled individuals, we boast a state-of-the-art ferro silicon production facility and a production base for various alloy and casting alloy products.
Silicon carbide materials used in steelmaking also have a very good promotion effect on the completion of the smelting process. It not only has a good deoxidation effect, but also helps reduce smelting time and improve the quality of steel products. The use of silicon carbide materials in industry can also reduce the consumption of raw materials, avoid environmental pollution, and effectively improve working conditions. Compared with the original process, the physical and chemical properties are more stable and the deoxidation effect is better.
Silicon carbide is a kind of metallurgical material. This material is widely used in the smelting industry because it has good performance and has made a great contribution. Due to its small natural content, silicon carbide is mainly used in the smelting industry. Mostly man-made. A common method is to mix quartz sand and coke, then use the silica and petroleum coke, add edible salt and sawdust, put it in an electric furnace, heat it to about 2,000 degrees Celsius, and obtain silicon carbide powder after a process. The chemical properties of silicon carbide materials are relatively stable.
It can speed up steelmaking, facilitate control of chemical composition, and improve the quality of steel. Silicon carbide is very suitable as a raw material for bearings or high-temperature furnaces. It will not melt under a variety of achievable pressures and has relatively low chemical activity. Due to its high thermal conductivity, high electric field strength and high current density, many people try to use it to replace silicon in the application of semiconductor high-power components. In addition to using this material as an abrasive in industry, silicon carbide powder is also coated on the inner wall of the turbine impeller or cylinder block using a special process, which can improve its wear resistance and extend its service life by 1 to 2 times; when purchasing silicon carbide You should also choose a reliable manufacturer. The quality of silicon carbide produced by our factory is guaranteed. If you have any questions or needs, you are welcome to call us for consultation.
