Good Quality Material Silicon Barium

ZHENAN main products are ferro silicon, ferro manganese, silicon manganese, ferro chrome, silicon carbide, carburant, etc. in meanwhile, chemical compositions and other alloys can also be optimized according to customers' requirements

Silicon-barium alloy is an alloy material made by mixing silicon and barium in a certain proportion and melting at high temperatures. It has specific chemical and physical properties and is widely used in many fields. Barium in silicon barium alloy is an alkaline earth metal with a strong affinity for oxygen, so it is often used as a deoxidizer in iron and steel smelting. Silicon barium alloy also has good chemical stability and is not easy to react with other elements. The density of silicon barium alloy is usually between that of Si and Ba, depending on the ratio of Si and Ba. Its melting point is usually lower than that of pure barium because the addition of silicon reduces the melting point of the alloy. The thermal and electrical conductivity of silicon barium alloy is usually lower than that of pure metal, but the specific value depends on the composition and preparation process of the alloy. In terms of mechanical properties, the strength and hardness of silicon barium alloy are usually higher than that of pure silicon and pure barium, and it has good ductility and toughness, which also depends on the composition and preparation process of the alloy. ‌

As a deoxidizer in iron and steel smelting, silicon barium alloy can effectively remove oxygen from steel and improve the quality and properties of steel. In addition, silicon and barium in the silicon barium alloy can form alloys with other elements in steel, improving the mechanical properties, hardness, wear resistance and corrosion resistance of steel. As an inoculant, silicon barium alloy is suitable for gray cast iron and nodular cast iron, which can promote the formation of "A" graphite and the integrity of graphite balls and improve the quality of castings. Its deoxidation effect is better than other deoxidation alloying agents, and it can nucleate in a wide temperature range, with strong spheroidizing ability and anti-aging ability, effectively preventing the casting from white mouth tendency. ‌Silicon-barium alloy can be used as a chemical raw material because of its good chemical stability and corrosion resistance. ‌

There are two main methods for smelting Si-Ba alloy: the one-step smelting method and the two-step smelting method. One-step smelting method is to add barium-containing minerals, silica, coke, steel chips, silicon carbide and other materials to the submerged arc furnace for smelting. The two-step smelting rule is that ferrosilicon is first smelted by a submerged arc furnace, and then ferrosilicon and barium-containing raw materials are added into an intermediate frequency furnace for smelting and refining to obtain barium-silicon alloy. As an important metallurgical raw material, silicon barium alloy plays an important role in improving the quality and performance of steel products, prolonging the service life and reducing the production cost, and is also of positive significance to environmental protection and resource utilization.

Hot Tags: good quality material silicon barium, China good quality material silicon barium manufacturers, suppliers, factory, Silicon Nano Powder 98 5, Ultrafine Silicon Powder 98 5, Silicon Powder Ultrafine 150 mesh, High Purity Silicon Metal Powder 600mesh, Industrial Silicon Powder 150 mesh, Pure Silicon Powder 97