What Are Ferrochrome Prices on November 16, 2026?
Ferrochrome on November 16, 2026 is quoted at CNY 7,250-7,700 per tonne for high carbon FeCr50C7.5 across seven regions, and at CNY 11,500-13,000 per tonne for the four 60-basis grades, all ex-works, cash, tax included, and unchanged against November 13. The 50-basis grade moves CNY 450 across its regional lines; the 60-basis block runs from a uniform CNY 11,500-11,600 on FeCr55C2.0 to CNY 12,300-13,000 on FeCr55C0.06. The grades sit on the high carbon ferro-chrome pages.
What Is the Ferrochrome Price on November 16, 2026?
The record separates two markets that share one heading. High carbon FeCr50C7.5 is priced on a 50% chromium basis, from CNY 7,250 in the north to CNY 7,700 in Shanghai, with the southwest, northwest, northeast, central and Shandong lines between. The four refined grades are all priced on a 60% chromium basis and sit almost double: CNY 11,500-11,600 for FeCr55C2.0, identical across Sichuan, Henan, Inner Mongolia and Guangxi.
Table 1. Ferrochrome prices by grade, ex-works cash, tax included, CNY per tonne, November 16, 2026
Scope: five grades, regional quotations within each, ex-works, cash, tax included. Two chromium bases appear and are printed per grade, because a price per tonne on a 50% basis and one on a 60% basis cannot be compared without the basis.
| Grade | Price range (CNY/MT) | Regions quoted | Chromium basis | Change |
|---|---|---|---|---|
| High Carbon FeCr50C7.5 | 7,250-7,700 | North, Southwest, Northwest, Northeast, Central, Shanghai, Shandong | 50% Cr | unchanged |
| Medium Carbon FeCr55C2.0 | 11,500-11,600 | Sichuan, Henan, Inner Mongolia, Guangxi | 60% Cr | unchanged |
| Low Carbon FeCr55C0.25 | 11,900-12,600 | Sichuan, Jiangsu, Shanxi, Inner Mongolia | 60% Cr | unchanged |
| Micro Carbon FeCr55C0.10 | 12,100-12,800 | Sichuan, Jiangsu, Shanxi, Inner Mongolia | 60% Cr | unchanged |
| Micro Carbon FeCr55C0.06 | 12,300-13,000 | Sichuan, Jiangsu, Shanxi, Inner Mongolia | 60% Cr | unchanged |
Note: Prices are in yuan per tonne exactly as published, ex-works, cash, tax included, compared with November 13, 2026. The chromium basis is part of each grade and not a description of it: FeCr50C7.5 is priced against 50% chromium and the four 55-designation grades against 60%. Confirm the supplier's own specification sheet for the lot.
Dividing each price by its chromium basis turns five tonnage figures into one comparable number, the cost of one percentage point of chromium per tonne. High carbon runs at CNY 145.0-154.0 per point; medium carbon at CNY 191.7-193.3; low carbon FeCr55C0.25 at CNY 198.3-210.0; micro carbon FeCr55C0.10 at CNY 201.7-213.3; and FeCr55C0.06 at CNY 205.0-216.7. The tonnage price nearly doubles from first grade to last; the price per point rises by about 41%.
That gap is the refining premium, and the record shows where it is earned. High carbon to medium carbon removes carbon from 7.5% to 2.0% and adds CNY 47 per chromium point at the floor of the ranges and CNY 39 at the ceiling; medium to low carbon takes it from 2.0% to 0.25% and adds only CNY 7 at the floor and CNY 17 at the ceiling. The last three refinements together cost less than the first.
Regional spreads differ between the blocks as well. On the 50-basis grade the spread is wide, CNY 450 between the cheapest and dearest line, 6.2% of the floor. FeCr55C2.0 shows no spread at all, with four provinces on the same figure. On the low and micro carbon grades the spread is CNY 700, 5.9% of the floor, in the same regional order each time: Jiangsu highest, Inner Mongolia lowest.
One caution about the site. The high carbon ferro-chrome page on this site describes the grade on a 60-65% chromium basis, while the record above prices FeCr50C7.5 on a 50% basis. Same grade family, different bases, so the two should not be read against each other without adjusting for chromium content.
Did Ferrochrome Prices Change Today?
No. Every grade in the record carries the same value against November 13, 2026, from the high carbon regional lines to all four 60-basis grades. The comparison date is published and the movement is a flat one, so this is a genuine unchanged rather than an absence of data.
- All five grades and every regional line - unchanged against November 13, 2026.
- High carbon FeCr50C7.5 - unchanged at CNY 7,250-7,700 across seven regional lines.
- Medium carbon FeCr55C2.0 - unchanged at a single CNY 11,500-11,600 in all four provinces.
- Low, micro carbon block - unchanged at CNY 11,900-13,000, with a CNY 700 spread inside each grade.
- Not published - volumes, and any figure beyond the November 13 comparison.
A flat market across five grades and nineteen regional lines is itself information: it says the settlement that cleared on the 16th was the one that cleared on the 13th, across every basis and region.
What Do the Grade Designations Fix?
The designation fixes two numbers and leaves the rest open. In FeCr50C7.5 the first figure is the chromium basis, 50%, and the second the carbon ceiling, 7.5%. FeCr55C2.0 is 55% chromium on a 60% basis with carbon capped at 2.0%; the micro carbon grades take that ceiling to 0.25%, 0.10% and 0.06%. Silicon, phosphorus and sulphur ceilings are not in the designation and not in this record.
Table 2. Ferrochrome grades, chromium and carbon from the designation, November 16, 2026
| Grade | Cr (%) | C (%) | Si (%) | P (%) | S (%) | Price basis |
|---|---|---|---|---|---|---|
| High Carbon FeCr50C7.5 | 50 nominal | ≤7.5 | n.p. | n.p. | n.p. | 50% Cr |
| Medium Carbon FeCr55C2.0 | 55 nominal | ≤2.0 | n.p. | n.p. | n.p. | 60% Cr |
| Low Carbon FeCr55C0.25 | 52.0-<60.0 | ≤0.25 | n.p. | n.p. | n.p. | 60% Cr |
| Micro Carbon FeCr55C0.10 | 55 nominal | ≤0.10 | n.p. | n.p. | n.p. | 60% Cr |
| Micro Carbon FeCr55C0.06 | 55 nominal | ≤0.06 | n.p. | n.p. | n.p. | 60% Cr |
Note: Cr and C are read from the designation as this record prints them, not from an assay; FeCr50C7.5 means a 50% chromium basis and a 7.5% maximum carbon. The 52.0-<60.0 chromium range is the one printed against FeCr55C0.25. n.p. = not published in this record. Silicon, phosphorus and sulphur ceilings are outside both the designation and the price sheet; confirm the supplier's own specification sheet for the lot.
The consequence is that the chromium basis is the number to check before comparing anything. A tonnage price on a 50% basis and one on a 60% basis look like different markets and are the same market measured differently: CNY 7,700 on a 50% basis is CNY 154 per chromium point, and CNY 11,600 on a 60% basis is CNY 193 per point. Read as tonnage alone the 60-basis grade appears 50% dearer; read per point of chromium, 26% dearer. The low carbon ferro chrome in steelmaking page covers the refined end of that ladder.
How Do High Carbon and Low Carbon Ferrochrome Prices Compare?
Table 3. High Carbon Ferro Chrome VS Low Carbon Ferro Chrome, November 16, 2026
| Dimension | High Carbon Ferro Chrome | Low Carbon Ferro Chrome |
|---|---|---|
| Price band in the record | CNY 7,250-7,700 per tonne | CNY 11,900-13,000 per tonne |
| Chromium basis | 50% Cr | 60% Cr |
| Carbon ceiling | ≤7.5% | ≤0.25% to ≤0.06% |
| Price per chromium point | CNY 145.0-154.0 | CNY 198.3-216.7 |
| Regional spread | CNY 450 across seven lines | CNY 700 inside each grade |
| Change on the day | Unchanged | Unchanged |
| Position in the pair | Lower band, tonnage basis | Higher band, refining premium |
Per point of chromium the low carbon grades cost CNY 53.3-62.7 more than the high carbon grade, 36.8% to 40.7% depending on which ends are taken. In tonnage the difference is CNY 4,200-5,750, but part of that is the basis. The premium buys a carbon ceiling an order of magnitude lower, which is what a steelmaker pays for when carbon is the tight specification.
What Should I Check Before Ordering Ferrochrome?
Seven items carry most of the commercial risk, and the quotation settles none of them.
- Chromium basis - 50% or 60%, stated with the price, since the tonnage figure alone is ambiguous.
- Carbon ceiling - the figure after the C in the designation, which separates the five grades.
- Silicon, phosphorus and sulphur - none appears in this record, so all three have to be specified.
- Region - the 50-basis lines differ by CNY 450 and the refined grades by CNY 700, so origin is part of the price.
- Size and packing - lump size, drum or bag, and net weight per unit.
- Delivery and payment - ex-works cash here, so freight, loading and credit terms sit outside the figure.
- Quantity, tolerance and inspection - lot size, quantity tolerance and inspection rights.
The basis is the item buyers most often leave out, and it costs most when it is wrong: a 50-basis offer read as a 60-basis offer looks 17% cheaper per tonne than it is per point of chromium. Ask for the basis with every offer and compare the derived figure. The what ferro chromium is used for page sets out where the alloy goes once it leaves the works.
FAQ
Table 4. Ferrochrome price questions, November 16, 2026
| Question | Answer |
|---|---|
| What are the ferrochrome prices for November 16, 2026? | Ex-works cash, tax included: FeCr50C7.5 at CNY 7,250-7,700 on a 50% chromium basis, FeCr55C2.0 at CNY 11,500-11,600, FeCr55C0.25 at CNY 11,900-12,600, FeCr55C0.10 at CNY 12,100-12,800 and FeCr55C0.06 at CNY 12,300-13,000. |
| Did ferrochrome prices change on November 16, 2026? | No. Every grade and regional line is unchanged against November 13, 2026, and the comparison date is published. |
| Why do the 60-basis grades look almost double the high carbon price? | Because the basis differs: FeCr50C7.5 is priced against 50% chromium and the refined grades against 60%, so per point of chromium the gap is 36.8% to 40.7%, not the near doubling seen in tonnage. |
| What is the price per point of chromium on each grade? | CNY 145.0-154.0 high carbon, 191.7-193.3 medium carbon, 198.3-210.0 low carbon, 201.7-213.3 at 0.10% carbon and 205.0-216.7 at 0.06% carbon per tonne. |
| Where is the regional spread widest? | On FeCr50C7.5, at CNY 450, 6.2% of the floor. FeCr55C2.0 shows no spread, with four provinces on the same CNY 11,500-11,600. |
| What should I confirm before ordering a lot? | The chromium basis, the carbon ceiling, silicon, phosphorus and sulphur ceilings, the region, packing, terms outside ex-works cash, and lot size, tolerance and inspection. |
Key Takeaways
- Five grades are quoted for November 16, 2026, ex-works cash, tax included, from CNY 7,250 to CNY 13,000 per tonne.
- No grade moved - every line is unchanged against November 13, 2026.
- Two chromium bases appear, 50% on the high carbon grade and 60% on the four refined grades.
- Per point of chromium the range runs from CNY 145.0 to CNY 216.7, a refining premium of 36.8% to 40.7% rather than the near doubling the tonnage figures suggest.
- Silicon, phosphorus and sulphur ceilings and the chromium basis all sit outside the grade name.
Request a Quote
Send the grade, the chromium basis, the carbon ceiling, the region, the quantity and the delivery point, and ZhenAn will answer with a quotation written against that specification rather than against a list price. Reach us on WhatsApp: +86 15518824805 or by Email: market@zanewmetal.com.


