What Are Ferromanganese Prices On November 16, 2026?

Nov 16, 2026

Leave a message

Sophia Miller
Sophia Miller
Sophia works as a refractory materials engineer at ZhenAn. She specializes in silicon carbide, refractory materials, and high-temperature applications, supporting the development of efficient solutions for steelmaking and furnace industries.

 

 

What Are Ferromanganese Prices on November 16, 2026?

 

Ferromanganese on November 16, 2026 runs from CNY 5,050 to CNY 10,100 per tonne across five grades, ex-works, cash, tax included. High carbon FeMn65C7.0 is quoted at CNY 5,050-5,500 and FeMn75C7.0 at CNY 5,600-6,100, blast furnace FeMn65C7.0 at CNY 5,300, medium carbon FeMn75C2.0 at CNY 7,600-8,000 with every priced line down CNY 100, and the low carbon grades at CNY 9,600-9,800 and CNY 9,900-10,100. The grades are described on the ferromanganese pages.

 

What Is the Ferromanganese Price on November 16, 2026?

 

Prices are published by grade and then by region, which is why one grade shows a range hundreds of yuan wide. FeMn65C7.0 opens at CNY 5,050 in Guangxi and closes at CNY 5,500 in Jiangsu, Shanghai and Tianjin; FeMn75C7.0 runs from CNY 5,600 in Inner Mongolia to CNY 6,100 in Zhejiang and Shanghai. The medium and low carbon grades sit thousands of yuan above them.

 

Table 1. Ferromanganese prices by grade, ex-works cash, tax included, CNY per tonne, November 16, 2026

 

Scope: five grades, regional quotations within each, ex-works, cash, tax included. Regions listed under a grade but carrying no figure are shown in the regions column and excluded from the range. A dash in the change column means no comparison was published.

 

Grade Price range (CNY/MT) Regions with a figure Basis Change
High Carbon FeMn65C7.0 5,050-5,500 Guangxi, Shanxi, Inner Mongolia, Shandong, Jiangsu, Shanghai, Tianjin Ex-works, cash, tax included -
High Carbon FeMn75C7.0 5,600-6,100 Yunnan, Guangxi, Inner Mongolia, Zhejiang, Shanghai Ex-works, cash, tax included -
Blast Furnace FeMn65C7.0 5,300 One line, no region named Ex-works, cash, tax included -
Medium Carbon FeMn75C2.0 7,600-8,000 Guizhou, Guangxi, Hunan, Henan, Inner Mongolia, Zhejiang Ex-works, cash, tax included down 100
Low Carbon FeMn80C0.7 9,600-9,800 Guizhou, Hunan, Shanxi Ex-works, cash, tax included -
Low Carbon FeMn80C0.4 9,900-10,100 Hunan, Henan Ex-works, cash, tax included -

 

Note: Prices are in yuan per tonne exactly as published, ex-works, cash, tax included. The record also lists regions with no figure - Sichuan, Guizhou, Henan and Liaoning under FeMn65C7.0, and Yunnan, Hunan and Guizhou under FeMn75C7.0 - and those are excluded from the ranges rather than read as zero. Confirm the supplier's own specification sheet for the lot.

 

Three readings follow. First, the regional spread inside one grade is not small: CNY 450 on FeMn65C7.0 and CNY 500 on FeMn75C7.0, 8.9% of each floor. Second, the higher manganese grade costs CNY 550-600 per tonne more at both ends, 10.9% of the lower grade. Third, blast furnace FeMn65C7.0 at CNY 5,300 sits inside the electric-furnace band, on a line with no region.

 

The medium and low carbon block is a separate market. FeMn75C2.0 spans CNY 7,600-8,000, CNY 1,500-1,900 above the FeMn75C7.0 ceiling; FeMn80C0.7 spans CNY 9,600-9,800 and FeMn80C0.4 CNY 9,900-10,100, roughly double the FeMn65C7.0 floor. The step between carbon ceilings is what the money buys, and each step costs more than the one before.

 

Phosphorus brackets matter as much as the grade name and are printed per region. FeMn65C7.0 quotes both P below 0.25% and P below 0.20%; FeMn75C7.0 spans P below 0.15% to below 0.30%; FeMn75C2.0 spans P below 0.20% to below 0.35%. Two lines under one heading are not the same product, and part of the price difference is the bracket.

 

Did Ferromanganese Prices Change Today?

 

One grade moved. Every priced line of medium carbon FeMn75C2.0 carries a reduction of CNY 100 per tonne: Guizhou at 7,600-7,700, Guangxi at 7,800-7,900, Hunan at 7,700-7,800, Henan at 7,600-7,700, Inner Mongolia at 7,700-7,800 and Zhejiang at 7,900-8,000. No other grade in the record carries a figure in the change column.

 

  • Medium carbon FeMn75C2.0 - down CNY 100 per tonne on all six priced regional lines.
  • High carbon FeMn65C7.0 and FeMn75C7.0 - a dash throughout, so no comparison was published.
  • Blast furnace FeMn65C7.0, low carbon FeMn80C0.7 and FeMn80C0.4 - a dash throughout.
  • Not published - the prior figure the CNY 100 is measured against, volumes, and the date of the previous reading.

 

A uniform reduction across every region of one grade, and none elsewhere, is a statement about that grade rather than about the market. The size is known, CNY 100 on a base of CNY 7,600-8,000, 1.3% of either end of the range, and the level it came from is not published.

 

The high carbon lines are the volume end of the trade and carry no movement figure at all. The grade where CNY 100 matters most in percentage terms, FeMn65C7.0, has no change data this date.

 

What Is the Difference Between High Carbon and Low Carbon Ferromanganese?

 

The difference is the carbon ceiling written into the designation and what that ceiling costs. In FeMn65C7.0 and FeMn75C7.0 the figure after the C is 7.0, so the grade is capped at 7% carbon; FeMn75C2.0 at 2%; FeMn80C0.7 at 0.7%; FeMn80C0.4 at 0.4%. The figure before the C, 65, 75 or 80, is the nominal manganese content. Removing carbon is the refining step the medium and low carbon grades pay for.

 

What the designation does not fix is the rest of the impurity package, and this record prints phosphorus per region while leaving silicon and sulphur unstated. Both have to be specified, and neither can be inferred from the grade name.

 

Table 2. Ferromanganese grades, manganese and carbon from the designation, phosphorus as quoted in this record

 

Grade Mn (%) C (%) Si (%) P (%) as quoted S (%)
High Carbon FeMn65C7.0 65 nominal ≤7.0 n.p. <0.20 and <0.25 n.p.
High Carbon FeMn75C7.0 75 nominal ≤7.0 n.p. <0.15 to <0.30 n.p.
Medium Carbon FeMn75C2.0 75 nominal ≤2.0 n.p. <0.20 to <0.35 n.p.
Low Carbon FeMn80C0.7 80 nominal ≤0.7 n.p. One-group and two-group, no figure n.p.
Low Carbon FeMn80C0.4 80 nominal ≤0.4 n.p. One-group and two-group, no figure n.p.

 

Note: Mn and C are read from the designation, not from an assay: FeMn65C7.0 means 65% nominal manganese and 7.0% maximum carbon. The phosphorus brackets are those printed against the regional lines. n.p. = not published in this record. Silicon and sulphur ceilings, and the one-group / two-group phosphorus limits for the low carbon grades, are not stated here; confirm the supplier's own specification sheet for the lot.

 

Two consequences for a buyer. A high carbon lot bought on its grade name alone may arrive anywhere between P below 0.15% and P below 0.35%, a large gap on a steel specification. And the low carbon grades are sold on a group classification rather than a number, so the limit has to be asked for. The High Carbon Ferromanganese page sets out the high carbon grade in the form most often ordered.

 

How Do High Carbon Ferromanganese and Low Carbon Ferromanganese Prices Compare?

 

Table 3. High Carbon Ferromanganese VS Low Carbon Ferromanganese, November 16, 2026

 

Dimension High Carbon Ferromanganese Low Carbon Ferromanganese
Price band in the record CNY 5,050-6,100 per tonne CNY 9,600-10,100 per tonne
Grades quoted FeMn65C7.0, FeMn75C7.0, blast furnace FeMn65C7.0 FeMn80C0.7, FeMn80C0.4
Carbon ceiling ≤7.0% ≤0.7% and ≤0.4%
Manganese content 65% and 75% nominal 80% nominal
Phosphorus as printed P <0.15 to <0.35 depending on region One-group and two-group, no figure
Change on the day No figure published No figure published
Position in the pair Lower band Higher band

 

The low carbon band sits CNY 3,500 above the high carbon ceiling at its floor, CNY 9,600 against CNY 6,100, and CNY 5,050 above the high carbon floor at its own ceiling. Moving from 7.0% to 0.7% carbon multiplies the price by 1.75 at the low end of each band; the step to 0.4% adds CNY 300.

 

What Should I Check Before Ordering Ferromanganese?

 

Seven items carry most of the commercial risk, and the quotation settles none of them.

 

  • Grade and both figures - manganese content and carbon ceiling, read together rather than as one name.
  • Phosphorus bracket - which bracket the lot sits in, since the record prints several under one grade.
  • Silicon and sulphur - neither appears in this record, so both have to be specified.
  • Region - regional lines are priced differently within one grade, so origin is part of the price.
  • Size and packing - lump size, drum or bag, and net weight per unit.
  • Delivery and payment - ex-works cash here, so freight, loading and credit terms sit outside.
  • Quantity, tolerance and inspection - lot size, tolerance and inspection rights.

 

The region is the item buyers most often leave out. FeMn65C7.0 spans CNY 5,050-5,500 for the same grade and delivery term, and nothing in the grade name says which end of that band an offer belongs to. The Low Carbon Ferromanganese page describes the low carbon product at the other end of the ladder.

 

FAQ

 

Table 4. Ferromanganese price questions, November 16, 2026

 

Question Answer
What are the ferromanganese prices for November 16, 2026? Ex-works cash, tax included: FeMn65C7.0 at CNY 5,050-5,500, FeMn75C7.0 at CNY 5,600-6,100, blast furnace FeMn65C7.0 at CNY 5,300, FeMn75C2.0 at CNY 7,600-8,000, and the low carbon grades at CNY 9,600-9,800 and CNY 9,900-10,100.
Did ferromanganese prices change on November 16, 2026? Medium carbon FeMn75C2.0 fell CNY 100 per tonne on all six priced regional lines. No other grade carries a change figure.
Why does one grade have a range hundreds of yuan wide? Prices are published by region. FeMn65C7.0 runs from CNY 5,050 in Guangxi to CNY 5,500 in Jiangsu, Shanghai and Tianjin, 8.9% of its floor, for the same grade and delivery term.
What does the phosphorus bracket mean? Each region is quoted against a maximum phosphorus level, from below 0.15% to below 0.35% depending on the grade, and the price reflects which bracket a line sits in.
How much more does low carbon cost than high carbon? FeMn80C0.7 at CNY 9,600-9,800 and FeMn80C0.4 at CNY 9,900-10,100 are 1.75 to 1.84 times the FeMn65C7.0 ceiling of CNY 5,500, and CNY 4,550-5,050 above its floor per tonne.
What should I confirm before ordering a lot? The manganese content and carbon ceiling, the phosphorus bracket, silicon and sulphur ceilings, the region of origin, packing, terms outside ex-works cash, and lot size, tolerance and inspection.

 

Key Takeaways

 

  • Five grades are quoted for November 16, 2026, ex-works cash, tax included, from CNY 5,050 to CNY 10,100 per tonne.
  • Only medium carbon FeMn75C2.0 moved - down CNY 100 per tonne on all six priced regional lines.
  • Regional spreads reach 8.9% of the floor on both high carbon grades, for identical grade and terms.
  • Low carbon material runs 1.75 to 1.84 times the high carbon ceiling, and the step from 0.7% to 0.4% carbon adds CNY 300.
  • Phosphorus brackets, silicon and sulphur ceilings and origin all sit outside the grade name.

 

Request a Quote

 

Send the grade, the manganese and carbon figures, the phosphorus bracket, the region, the quantity and the delivery point, and ZhenAn will answer with a quotation written against that specification rather than against a list price. Reach us on WhatsApp: +86 15518824805 or by Email: market@zanewmetal.com.