What Are Ferrovanadium Prices on November 16, 2026?
Ferrovanadium on November 16, 2026 is quoted at CNY 76,500-78,500 per tonne for FeV50 and CNY 122,400-125,600 per tonne for FeV80, acceptance bill, tax included, with big-mill FeV50 at CNY 79,000 cash against CNY 80,000-81,000 asked. The source prints these in ten thousand yuan per tonne, 7.65-7.85, 12.24-12.56, 7.9 and 8-8.1; the yuan figures here are arithmetic on them. One line moves: big-mill FeV50 transaction is down 0.05 in the source unit, CNY 500 per tonne. The grades are described on the ferrovanadium pages.
What Is the Ferrovanadium Price on November 16, 2026?
Three quotations and two transaction ranges are published. Mainstream FeV50 trades at 7.65-7.85 and is offered at 7.9-8.1, acceptance bill, tax included. FeV80 trades at 12.24-12.56 and is offered at 12.64-12.96, same basis. Big-mill FeV50 trades at 7.9, down 0.05, and is offered at 8-8.1, cash and tax included, a different settlement basis from the mainstream lines.
Table 1. Ferrovanadium prices, CNY ten thousand per tonne, November 16, 2026
Scope: FeV50 mainstream and big-mill, FeV80, transaction and quotation, printed in ten thousand yuan per tonne as the source publishes them. The basis column carries the settlement and tax term. A dash in the change column means no comparison was published.
| Grade | Transaction | Quotation | Basis | Change |
|---|---|---|---|---|
| Ferrovanadium FeV50, mainstream | 7.65-7.85 | 7.9-8.1 | CNY ten thousand per tonne, acceptance bill, tax included | - |
| Ferrovanadium FeV80 | 12.24-12.56 | 12.64-12.96 | CNY ten thousand per tonne, acceptance bill, tax included | - |
| Ferrovanadium FeV50, big mill | 7.9 | 8-8.1 | CNY ten thousand per tonne, cash, tax included | down 0.05 |
Note: Figures are printed as published, in ten thousand yuan per tonne; multiply by 10,000 for the yuan figure, so 7.65 becomes CNY 76,500 and 12.24 becomes CNY 122,400. The three lines do not share one settlement basis and the source labels them separately, so a cash figure and an acceptance-bill figure are not interchangeable. Confirm the settlement terms and the supplier's own specification sheet for the lot.
Read in yuan, mainstream FeV50 runs from CNY 76,500 to CNY 78,500 per tonne against an asking range of CNY 79,000 to CNY 81,000, so the transaction sits CNY 2,500 below the quotation at both ends. FeV80 trades at CNY 122,400-125,600 against CNY 126,400-129,600 asked, a gap of CNY 4,000 at both ends, so the gap widens with the grade on the same settlement basis.
Big-mill FeV50 on a cash basis trades at CNY 79,000, CNY 2,500 above the top of the mainstream transaction range and CNY 2,000 above its own quotation floor. The two FeV50 lines run on different settlement terms and the record does not translate one into the other, so the gap is stated and not interpreted.
On contained vanadium the two grades nearly meet, the most useful arithmetic in the record. FeV50 at CNY 76,500-78,500 per tonne works out at about CNY 153-157 per kg of vanadium at a 50% content, and FeV80 at CNY 122,400-125,600 at about the same per kg at an 80% content. The two pairs land on the same figures at both ends: the higher grade costs more per tonne in almost exact proportion to the vanadium it carries.
Did Ferrovanadium Prices Change Today?
One of the three lines moved. Big-mill FeV50 transaction is down 0.05 in the source unit, CNY 500 per tonne, against a quotation that is printed without a comparison. The mainstream FeV50 and FeV80 lines both carry a dash in the change column, so no comparison was published for them.
- Big-mill FeV50 - transaction down CNY 500 per tonne, the only movement in the record.
- Mainstream FeV50 and FeV80 - a dash on both, with no earlier reading in the source.
- FeV80 quotation is printed at 12.64-12.96 with no change figure, so its movement is not stated.
- Not published - volumes, the date of the previous reading, and any conversion between cash and acceptance-bill terms.
A single movement on a cash-basis line says less than it appears to. It is one grade on one settlement basis, and the source does not publish the prior figure the 0.05 is measured against, so the size of the move is known but the level it came from is not. Filed as a level, big-mill FeV50 sits at CNY 79,000 cash and tax included.
The rest of the record is levels, and their relationship is where the information sits: the FeV50 pair differs by settlement basis, the FeV80 pair by grade, and the two grades converge on contained vanadium.
What Is the Difference Between Ferrovanadium FeV50 and FeV80?
The difference is vanadium content and therefore the tonnage needed for a given addition. FeV50 carries vanadium at a nominal 50%, so a tonne of alloy delivers about 500 kg of vanadium; FeV80 carries 78-82%, so a tonne delivers roughly 800 kg. A plant adding a fixed quantity of vanadium buys about 60% more alloy tonnage at FeV50 than at FeV80, and freight, handling and storage scale with the tonnage rather than with the vanadium.
Both designations belong to the ferrovanadium grade family set by GB/T 4139-2012. The limits that family places on carbon, silicon, phosphorus, sulphur and aluminium are not reproduced here, because this price record does not carry them.
Table 2. Ferrovanadium grades, vanadium content and stated ceilings
| Grade | V (%) | C (%) | Si (%) | P (%) | S (%) |
|---|---|---|---|---|---|
| Ferrovanadium FeV50 | 50 nominal, from the designation | n.p. | n.p. | n.p. | n.p. |
| Ferrovanadium FeV80 | 78-82, as stated on the site grade page | n.p. | n.p. | n.p. | n.p. |
Note: n.p. = not published in this price record. The FeV50 figure is the 50 in the designation and the FeV80 band is the range stated on the site's own grade page; neither is an assay. Carbon, silicon, phosphorus, sulphur and aluminium ceilings are not stated here. Confirm the supplier's own specification sheet for the lot before those limits are written into a contract.
Read the table for what it avoids rather than what it states. The grade number fixes vanadium content and leaves every other element open, so two lots sold as FeV50 can differ in silicon and aluminium and still carry the same name. A vanadium addition is usually small against the heat it goes into, which makes the impurity carry-over matter more per kilogramme than the vanadium content does.
The Ferrovanadium FeV80 page describes the higher grade as the site presents it, including the content band quoted above; size, packing and the assay that ships with the lot are outside this price record.
How Do Ferrovanadium FeV50 and FeV80 Prices Compare?
Table 3. Ferrovanadium FeV50 VS Ferrovanadium FeV80, November 16, 2026
| Dimension | Ferrovanadium FeV50 | Ferrovanadium FeV80 |
|---|---|---|
| Transaction, source unit | 7.65-7.85 | 12.24-12.56 |
| Transaction, CNY per tonne | 76,500-78,500 | 122,400-125,600 |
| Settlement basis | Acceptance bill, tax included | Acceptance bill, tax included |
| Vanadium content used | 50% nominal | 80% of the 78-82% band |
| Cost per kg of vanadium | About CNY 153-157 | About CNY 153-157 |
| Alloy tonnage for a fixed V addition | Higher | Lower |
| Change on the day | No figure published | No figure published |
The comparison resolves into one figure: CNY 153-157 per kg of vanadium either way. The FeV80 transaction at CNY 122,400-125,600 is 60% higher per tonne than the FeV50 range and carries 60% more vanadium, so the premium is content, not margin. The choice between the grades turns on freight and handling per tonne, melting practice and the impurity package, none of which the record covers.
What Should I Check Before Ordering Ferrovanadium?
Seven items carry most of the commercial risk, and the quotation settles none of them.
- Grade and vanadium content - the content guaranteed per lot, not only the grade name.
- Full analysis - silicon, aluminium, carbon, phosphorus and sulphur ceilings, which the grade number does not fix.
- Settlement basis - cash or acceptance bill, since the two are printed side by side and are not interchangeable.
- Size and packing - lump size, drum or bag, and unit weight of the lot.
- Delivery term and tax - the record is tax included but names no delivery point.
- Analysis and sampling - certificate of analysis per lot and the sampling method behind it.
- Quantity, tolerance and inspection - lot size, quantity tolerance and inspection rights.
The settlement point deserves its own line, because it is the largest single variable in the record after the grade. A cash FeV50 figure and an acceptance-bill FeV50 figure differ by CNY 2,500 per tonne on this date, and the Ferrovanadium FeV50 page presents the lower grade in the form most often ordered. Fixing the basis before comparing prices avoids comparing two numbers that were never meant to be compared.
FAQ
Table 4. Ferrovanadium price questions, November 16, 2026
| Question | Answer |
|---|---|
| What are the ferrovanadium prices for November 16, 2026? | FeV50 trades at 7.65-7.85 and is offered at 7.9-8.1, acceptance bill and tax included; FeV80 trades at 12.24-12.56 against 12.64-12.96. In yuan that is CNY 76,500-78,500 and CNY 122,400-125,600. |
| Did ferrovanadium prices change on November 16, 2026? | Big-mill FeV50 transaction is down 0.05 in the source unit, CNY 500 per tonne, on a cash basis. The mainstream FeV50 and FeV80 lines carry a dash, so no comparison was published for them. |
| Why are prices printed in ten thousand yuan? | That is the unit the source publishes in. Multiply by 10,000 for the yuan figure: 7.65 becomes CNY 76,500 and 12.24 becomes CNY 122,400 per tonne. |
| What is the difference between FeV50 and FeV80? | Vanadium content: 50% nominal against 78-82%. Per tonne FeV80 costs about 60% more and carries about 60% more vanadium, so both land at roughly CNY 153-157 per kg of vanadium. |
| Is the quoted price cash or acceptance bill? | Both appear. The mainstream FeV50 and FeV80 lines are acceptance bill, tax included; the big-mill FeV50 line is cash, tax included. The two bases are not interchangeable. |
| What should I confirm before ordering a ferrovanadium lot? | The guaranteed vanadium content, the silicon, aluminium, carbon, phosphorus and sulphur ceilings, the settlement basis, size and packing, the delivery point, the certificate of analysis, and lot size, tolerance and inspection rights. |
Key Takeaways
- FeV50 trades at 7.65-7.85 and is offered at 7.9-8.1, acceptance bill and tax included, equal to CNY 76,500-78,500 per tonne.
- FeV80 trades at 12.24-12.56 against a quotation of 12.64-12.96, equal to CNY 122,400-125,600 per tonne.
- Only big-mill FeV50 moved - down CNY 500 per tonne, on a cash basis, with the prior level unpublished.
- Both grades land at about CNY 153-157 per kg of vanadium, so the grade choice turns on tonnage, melting practice and impurities.
- Cash and acceptance-bill figures differ by CNY 2,500 per tonne on this date and must not be compared as one price.
Request a Quote
Send the grade, the guaranteed vanadium content, the analysis you need, the settlement basis, the quantity and the delivery point, and ZhenAn will answer with a quotation written against that specification rather than against a list price. Reach us on WhatsApp: +86 15518824805 or by Email: market@zanewmetal.com.


