FeV50 vs FeV80 Ferrovanadium Specifications
FeV50 and FeV80 are two of the most commonly selected ferrovanadium grades in steelmaking and alloy production.
Although both function as effective vanadium alloying additives, they differ in vanadium concentration, alloying efficiency, and recommended industrial applications.
Selecting the right grade helps steel producers achieve stable chemistry control, optimized alloy cost, and consistent mechanical performance.
1. Chemical Composition Comparison
| Grade | Vanadium (V) | Carbon (C) Max | Silicon (Si) Max | Phosphorus (P) Max | Sulfur (S) Max |
|---|---|---|---|---|---|
| FeV50 | 48–55% | ≤0.4% | ≤1.5% | ≤0.05% | ≤0.05% |
| FeV80 | 78–82% | ≤0.3% | ≤1.0% | ≤0.04% | ≤0.04% |
From a procurement perspective, FeV50 is widely used for large-volume alloying, while FeV80 offers higher vanadium concentration per ton, reducing total addition weight.
2. Alloying Efficiency and Vanadium Recovery
FeV50 Ferrovanadium
Stable dissolution in molten steel
Predictable vanadium recovery rate
Suitable for continuous and large-scale steel production
FeV80 Ferrovanadium
Higher vanadium yield with smaller additions
Better control for precise alloy chemistry
Ideal for limited furnace capacity or high-grade steels
ZhenAn ferrovanadium is supplied with controlled impurity levels and consistent sizing, supporting reliable alloying performance.
3. Application-Oriented Grade Selection
FeV50 – Cost-Effective Alloying Solution
FeV50 is preferred where moderate vanadium content delivers the required mechanical properties without increasing alloy cost.
Typical applications include:
Structural steel
Rail steel
General alloy steel
Medium-strength engineering steel
This grade is especially suitable for mills focusing on production stability and cost efficiency.
FeV80 – High-Performance Alloying Grade
FeV80 is selected for steels requiring higher strength, wear resistance, and fatigue performance.
Typical applications include:
Tool steel
Spring steel
Wear-resistant steel
High-load mechanical components
Its high vanadium content enables accurate composition adjustment with lower addition volumes.
4. Physical Form and Packaging Options
FeV50 and FeV80 are available in:
Lump or crushed form
Customized particle size ranges
Standard 1 MT big bags or tailored packaging
ZhenAn supports specification customization to match different furnaces and feeding systems.
5. How to Choose Between FeV50 and FeV80
| Selection Factor | Recommended Grade |
|---|---|
| Large-scale steel output | FeV50 |
| Precise alloy composition control | FeV80 |
| Cost-sensitive alloying | FeV50 |
| High-performance steel grades | FeV80 |
Our technical team can assist buyers in selecting the most suitable ferrovanadium grade based on steel grade, melting practice, and target chemistry.
Frequently Asked Questions (FAQ)
Q1: Is FeV80 always superior to FeV50?
No. FeV80 contains more vanadium, but FeV50 may be more economical and practical for high-volume steel production.
Q2: Can FeV50 and FeV80 be combined in one process?
Yes. Some producers use both grades to fine-tune vanadium content while managing alloying cost.
Q3: Which grade offers better vanadium recovery?
FeV80 typically delivers higher recovery per unit weight, while FeV50 provides stable and predictable recovery behavior.
Q4: Are custom specifications available?
Yes. ZhenAn offers customized chemical limits, particle sizes, and packaging options based on customer requirements.
Q5: What quality documents are provided?
Each shipment can include chemical analysis, size distribution reports, and third-party inspection certificates upon request.
Why Choose ZhenAn
Why Choose ZhenAn
Reliable Quality – Strict control of raw materials and production processes, with inspection reports available for each batch.
Complete Product Range – Ferrovanadium, Vanadium Pentoxide, Metallic Silicon, Silicon Powder, Electrolytic Manganese Flakes, Ferrosilicon, Silicomagnesium, Silicocalcium, Polysilicon, Silicon Nitride, Metallic Manganese, Silicon-Zirconium, Silicon-Barium, Silicon Carbide, Cored Wire, Zinc Wire, Calcium Carbide.
Flexible Customization – Grades, particle sizes, and packaging tailored to different metallurgical and industrial applications.
Proven Export Capability – Experienced in international trade, inspection, documentation, and global logistics.
Stable Supply – Long-term cooperation with qualified manufacturers ensures consistent output and delivery.
Fast Response – Quick quotations and clear technical communication.
Cost-Effective Solutions – Focus on practical performance and total production value, not just unit price.
Contact: market@zanewmetal.com
one-stop solution
professional team
high quality