What Are Ferrosilicon Prices on November 16, 2026?
Ferrosilicon for export from Tianjin is quoted at USD 1,160-1,200 per tonne for the 72 grade and USD 1,220-1,250 per tonne for the 75 grade on November 16, 2026, both FOB Tianjin. The 75 grade sits USD 60 above the 72 grade at the bottom of the ranges and USD 50 above it at the top. Neither line carries a change figure, so this issue states levels and nothing about direction. Both grades are described on the ferrosilicon pages.
What Is the Ferrosilicon Price on November 16, 2026?
One price per grade, both on the same delivery term: USD 1,160-1,200 for FeSi72 and USD 1,220-1,250 for FeSi75 per metric tonne FOB Tianjin. The ranges are 40 and 30 dollars wide and they do not overlap, the cheapest tonne of FeSi75 at USD 1,220 sitting USD 20 above the dearest tonne of FeSi72 at USD 1,200.
Table 1. Ferrosilicon export prices, FOB Tianjin, November 16, 2026
Scope: two grades, one quotation range each, per metric tonne FOB Tianjin, in US dollars as published. The record carries no transaction range, no packing weight, no size split, no payment term and no change figure; a dash in the change column means no comparison was published, not that the level held.
| Grade | Price (USD/MT) | Basis | Specification | Change |
|---|---|---|---|---|
| Ferro Silicon 72 (FeSi72) | 1160-1200 | FOB Tianjin, USD per tonne | Si 72.0-<75.0%, Al 2.0% max, PG FeSi72Al2.0 per GB/T 2272-2020 | - |
| Ferro Silicon 75 (FeSi75) | 1220-1250 | FOB Tianjin, USD per tonne | Si 75.0-<80.0%, Al 1.5% max, PG FeSi75Al1.5 per GB/T 2272-2020 | - |
Note: Prices are in US dollars per metric tonne exactly as published, FOB Tianjin. The source states no packing, no lump size, no container load, no payment route and no change figure. The specification column names the standard grade the quotation is normally written against; it is not a certificate for any lot. Confirm the supplier's own specification sheet for the lot.
Read on contained silicon, the two grades nearly meet. A tonne of FeSi72 carries at least 720 kg of silicon, so USD 1,160-1,200 per tonne works out at about USD 1.61-1.67 per kg of silicon; a tonne of FeSi75 carries at least 750 kg, so USD 1,220-1,250 works out at about USD 1.63-1.67 per kg. The per-tonne premium is close to the extra 30 kg of silicon the higher grade carries, which is why the per-kilogramme figures overlap.
Both per-kilogramme readings use the floor of each band, 72.0% and 75.0%, the only composition figures the standard fixes as a minimum. A lot at the top of its band carries more silicon for the same money, and the quotation does not say where inside the band it sits.
Did Ferrosilicon Prices Change Today?
The record does not say. Both lines carry a dash where the change column would hold a figure, and the source publishes no earlier ferrosilicon reading, so November 16, 2026 stands as a set of levels without a stated movement. A dash in that column is an absence of data, not a zero.
- Levels stated - FeSi72 at USD 1,160-1,200 and FeSi75 at USD 1,220-1,250 per tonne, FOB Tianjin.
- Change column - a dash on both lines, with no prior reading in the source to anchor a comparison.
- Spread between grades - USD 60 at the bottom of the ranges and USD 50 at the top.
- Not published - transaction prices, volumes, packing and the date of the previous reading.
A single issue with no comparison cannot establish a trend, so the numbers are filed as levels to be read against the next issue. The only relationship the page does support is the spread between the grades on one date, and that is arithmetic rather than movement.
The distinction matters commercially: a buyer holding an earlier offer cannot tell from this page whether today is better, but can tell what the two grades cost relative to each other when a specification takes either.
What Is the Difference Between Ferro Silicon 72 and Ferro Silicon 75?
The difference is the silicon floor and, in the common trade variants, the aluminium ceiling. Under GB/T 2272-2020 the ordinary ferrosilicon family is specified in bands: the 72 band runs from 72.0% to below 75.0% silicon, the 75 band from 75.0% to below 80.0%. Aluminium is capped at 1.5% in the Al1.5 variants and 2.0% in the Al2.0 variants, and both bands are offered in both.
The impurity ceilings move with the variant rather than with the silicon band. Carbon is capped at 0.10% in FeSi75Al1.5 and 0.20% in FeSi72Al1.5 and FeSi75Al2.0, phosphorus at 0.045% in the Al1.5 variants and 0.040% in the Al2.0 variants, sulphur at 0.020% across the family. Buying on the grade name alone fixes the silicon floor and leaves the impurity package open.
Table 2. Ferrosilicon composition limits, GB/T 2272-2020 Table 2, mass fraction %
| Grade | Si (%) | Al (%) | Ca (%) | P (%) | S (%) | C (%) |
|---|---|---|---|---|---|---|
| PG FeSi75Al1.5 | 75.0-<80.0 | ≤1.5 | ≤1.5 | ≤0.045 | ≤0.020 | ≤0.10 |
| PG FeSi72Al1.5 | 72.0-<75.0 | ≤1.5 | ≤1.5 | ≤0.045 | ≤0.020 | ≤0.20 |
| PG FeSi75Al2.0 | 75.0-<80.0 | ≤2.0 | ≤1.5 | ≤0.040 | ≤0.020 | ≤0.20 |
Note: Limits are quoted from GB/T 2272-2020, Table 2, in mass fraction percent. The manganese, chromium and titanium ceilings sit in merged cells of that table and are not reproduced here; confirm the supplier's own specification sheet for the lot before those elements are written into a contract.
Under GB/T 2272-2020, FeSi75Al1.5 is specified with Si 75.0-<80.0%, Al ≤1.5%, Ca ≤1.5%, P ≤0.045%, S ≤0.020% and C ≤0.10%, while FeSi72Al1.5 carries Si 72.0-<75.0% with the same impurity ceilings except C ≤0.20%. The 0.10% carbon ceiling is a difference in the specification, not a presentation choice, and it is why a carbon-critical heat cannot simply take the cheaper grade.
Sizing is a separate decision from composition. The standard supplies ferrosilicon as natural lump, processed lump at 10-50 mm, granules at 3-10 mm or powder at 0-3 mm, and the export quotation names none of them. The Ferro Silicon 75 page describes the higher grade in the form most often shipped; the size has to be named in the enquiry, because a tonne of lump and a tonne of powder are not the same product at the same silicon floor.
How Do Ferro Silicon 72 and Ferro Silicon 75 Prices Compare?
Table 3. Ferro Silicon 72 VS Ferro Silicon 75, FOB Tianjin, November 16, 2026
| Dimension | Ferro Silicon 72 | Ferro Silicon 75 |
|---|---|---|
| Published price | USD 1,160-1,200 per tonne | USD 1,220-1,250 per tonne |
| Price basis | FOB Tianjin | FOB Tianjin |
| Silicon band | Si 72.0-<75.0% | Si 75.0-<80.0% |
| Carbon ceiling, Al1.5 variant | C ≤0.20% | C ≤0.10% |
| Range width | USD 40 per tonne | USD 30 per tonne |
| Position in the pair | Lower of the two | Higher of the two |
The comparison resolves into one number: FeSi75 costs USD 50-60 more per tonne, or about USD 0.02 per kg of contained silicon at the floor of each band. A plant that can take either grade and pays for silicon alone is buying roughly the same silicon per dollar; a plant that needs the tighter carbon ceiling is buying what the cheaper grade does not carry.
What Should I Check Before Ordering Ferrosilicon?
Seven items carry most of the commercial risk on a ferrosilicon lot, and the quotation settles none of them.
- Grade and variant - name the silicon band and the aluminium variant, because 75Al1.5 and 75Al2.0 carry different phosphorus and carbon ceilings at the same silicon floor.
- Size and form - natural lump, processed lump 10-50 mm, granules 3-10 mm or powder 0-3 mm.
- Packing and unit weight - bag weight, drum or bulk container, and whether the load is one lot.
- Delivery term - the quotation is FOB Tianjin, so freight, insurance and destination costs sit outside it.
- Payment route - no payment term is named in the source, so tenor and documents are agreed separately.
- Analysis and documentation - certificate of analysis per lot and the sampling method behind it.
- Quantity, tolerance and inspection - lot size, quantity tolerance and whether a pre-loading inspection is accepted.
One point belongs with the paperwork rather than the metal. Ferrosilicon ships against a declared silicon analysis, and the gap between a lot at the floor of its band and one at the top is worth more than the spread between the two grades. The Ferro Silicon 72 page sets out the lower grade as it is usually ordered; the payment should be tied to the assay on the certificate rather than to the grade name alone.
FAQ
Table 4. Ferrosilicon price questions, November 16, 2026
| Question | Answer |
|---|---|
| What are the ferrosilicon prices for November 16, 2026? | FeSi72 is quoted at USD 1,160-1,200 per tonne and FeSi75 at USD 1,220-1,250 per tonne, both FOB Tianjin. The ranges do not overlap. |
| Did ferrosilicon prices change on November 16, 2026? | No change figure is published for either grade. Both lines carry a dash in the change column and the source holds no earlier reading, so the date stands as levels with no stated movement. |
| Why is FeSi75 quoted above FeSi72? | FeSi75 carries a silicon floor three points higher and a tighter carbon ceiling in the Al1.5 variants. The USD 50-60 gap matches the extra 30 kg of silicon a tonne of the higher grade carries at the floor of each band. |
| Is the ferrosilicon price FOB or delivered? | FOB Tianjin, per metric tonne, in US dollars. Freight, insurance, destination charges and payment terms sit outside the quoted number. |
| What lump size does the quotation cover? | None is stated. Ferrosilicon is supplied as natural lump, processed lump 10-50 mm, granules 3-10 mm or powder 0-3 mm, and the quotation names no size. |
| What should I confirm before ordering a ferrosilicon lot? | The silicon band and aluminium variant, size and packing, the certificate of analysis with its sampling method, the FOB charges included, the payment route and documents, and lot size, tolerance and inspection rights. |
Key Takeaways
- Two export grades are published for November 16, 2026 - FeSi72 at USD 1,160-1,200 and FeSi75 at USD 1,220-1,250 per tonne, both FOB Tianjin.
- Neither line carries a change figure, so the issue states levels and says nothing about direction.
- FeSi75 sits USD 60 above FeSi72 at the bottom of the ranges and USD 50 above at the top.
- On contained silicon the pair nearly converges, at about USD 1.61-1.67 per kg for FeSi72 and USD 1.63-1.67 per kg for FeSi75, measured at the floor of each band.
- Composition, size, packing, payment route and inspection rights are outside the quotation and belong in the contract.
Request a Quote
Send the grade and variant, the size and packing, the quantity and the destination port, and ZhenAn will answer with a quotation written against that specification rather than against a list price. Reach us on WhatsApp: +86 15518824805 or by Email: market@zanewmetal.com.


