What Are Silicon Metal Prices On November 16, 2026?

Nov 16, 2026

Leave a message

Laura Johnson
Laura Johnson
Laura works as an international procurement consultant at ZhenAn. She focuses on global sourcing, supply chain management, and customer requirements, helping buyers select suitable metallurgical materials and improve purchasing efficiency.

 

 

What Are Silicon Metal Prices on November 16, 2026?

 

Silicon metal for export is quoted at USD 1,320-1,340 per tonne for grade 553, USD 1,380-1,400 for 441, USD 1,480-1,500 for 3303, USD 1,450-1,480 for 421 and USD 1,980-2,030 for 2202 on November 16, 2026, all FOB Huangpu. No line carries a change figure. The grades are described on the silicon metal pages.

 

What Is the Silicon Metal Price on November 16, 2026?

 

Five grades, one quotation range each, all per metric tonne FOB Huangpu in US dollars, from USD 1,320-1,340 for 553 up to USD 1,980-2,030 for 2202. The ranges are 20 to 50 dollars wide. Only 421 and 3303 nearly meet: the cheapest tonne of 421 at USD 1,450 sits USD 30 below the cheapest tonne of 3303 at USD 1,480.

 

Table 1. Silicon metal export prices, FOB Huangpu, November 16, 2026

 

Scope: five grades, one quotation range each, per metric tonne FOB Huangpu, US dollars as published, tax included as the source states. No transaction range, no size split, no packing weight and no change figure; a dash means no comparison was published.

 

Grade Price (USD/MT) Basis Specification Change
Silicon Metal 553 1320-1340 FOB Huangpu, USD per tonne Grade 553, Fe-Al-Ca code 5-5-3 -
Silicon Metal 441 1380-1400 FOB Huangpu, USD per tonne Grade 441, Fe-Al-Ca code 4-4-1 -
Silicon Metal 3303 1480-1500 FOB Huangpu, USD per tonne Grade 3303, Fe-Al-Ca code 3-3-03 -
Silicon Metal 421 1450-1480 FOB Huangpu, USD per tonne Grade 421, Fe-Al-Ca code 4-2-1 -
Silicon Metal 2202 1980-2030 FOB Huangpu, USD per tonne Grade 2202, Fe-Al-Ca code 2-2-02 -

 

Note: Prices are in US dollars per metric tonne exactly as published, FOB Huangpu, tax included as the source states. The specification column restates the grade code in the order the trade reads it, iron first, aluminium second, calcium third; it is a designation, not a certificate for any lot. Confirm the supplier's own specification sheet for the lot.

 

The sequence is not monotonic, and that is the first thing to read off the table. Grade 421 at USD 1,450-1,480 is quoted below grade 3303 at USD 1,480-1,500, by USD 30 at the bottom and USD 20 at the top, although 421 carries the lower iron and calcium ceilings of the two. The record states the prices and gives no reason for the order.

 

The largest step sits at the top of the table. Grade 2202 at USD 1,980-2,030 is USD 500-530 above grade 3303, and 50% to 51% above grade 553 at the bottom of the sequence. The record prices that band at roughly one and a half times the lowest grade on the same day and the same delivery term, and gives no reason for the ratio.

 

Did Silicon Metal Prices Change Today?

 

The record does not say. All five lines carry a dash in the change column, and the source publishes no earlier silicon metal reading to compare against, so November 16, 2026 stands as five levels without a stated movement. A dash is an absence of data, not a zero.

 

  • Five grades are quoted - 553, 441, 3303, 421 and 2202, all FOB Huangpu, per metric tonne in US dollars.
  • Change column - a dash on every line, with no earlier reading in the source.
  • Full spread - USD 1,320 at the bottom of 553 to USD 2,030 at the top of 2202, a range of USD 710.
  • Not published - transaction prices, volumes, size and packing, and the date of the previous reading.

 

A single issue with no comparison cannot establish a trend, so the five numbers are filed as levels to be read against the next issue. What the page supports is the structure of the grade ladder on one date, arithmetic rather than movement.

 

That structure is what a buyer can use today. If a specification allows either 421 or 3303, the record prices 421 below 3303; if it allows 441 and 553, the gap is USD 60 per tonne at both ends of the ranges.

 

What Is the Difference Between Silicon Metal 441 and Silicon Metal 553?

 

The difference is the impurity package carried in the grade code. The four digits list iron, aluminium and calcium in that order, so 553 reads iron 0.5%, aluminium 0.5% and calcium 0.3%, while 441 reads iron 0.4%, aluminium 0.4% and calcium 0.1%. Both are quoted in the same delivery term, FOB Huangpu, and both fall at the bottom of the published sequence, 553 the lowest and 441 USD 60 above it.

 

What those ceilings fix is the chemistry the customer's own product can tolerate. An application sensitive to calcium takes the tighter ceiling of 441 or better; an aluminium alloy that only needs a silicon source can work with 553. The record does not rank the grades by use, and the codes state no silicon floor at all, so silicon content has to come from the supplier's sheet.

 

Table 2. Silicon metal grade codes and impurity ceilings, as read from the designations

 

Grade Si (%) Fe (%) Al (%) Ca (%) Fe-Al-Ca code
421 n.p. ≤0.4 ≤0.2 ≤0.1 4-2-1
2202 n.p. ≤0.2 ≤0.2 ≤0.02 2-2-02
3303 n.p. ≤0.3 ≤0.3 ≤0.03 3-3-03
441 n.p. ≤0.4 ≤0.4 ≤0.1 4-4-1
553 n.p. ≤0.5 ≤0.5 ≤0.3 5-5-3

 

Note: n.p. = not published in this price record. The iron, aluminium and calcium ceilings are read directly from the four-digit grade designation, which lists them in that order; they are designation readings, not an extract from a standard text. Silicon floors and trace elements are not stated here. Confirm the supplier's own specification sheet for the lot before the ceilings are written into a contract.

 

Read the codes carefully. In 441 and 553 the calcium figure is the last digit carried to one decimal, 0.1% and 0.3%; in 3303 and 2202 it is written to two decimals, 0.03% and 0.02%. Treating the ladder as three uniformly falling numbers misreads the calcium ceiling by a factor of ten.

 

Three things the record does not carry decide what a tonne delivers: the silicon floor, the lump or powder size and the packing. The Silicon Metal 441 page describes the tighter grade as it is usually ordered.

 

How Do Silicon Metal 441 and Silicon Metal 553 Prices Compare?

 

Table 3. Silicon Metal 441 VS Silicon Metal 553, FOB Huangpu, November 16, 2026

 

Dimension Silicon Metal 441 Silicon Metal 553
Published price USD 1,380-1,400 per tonne USD 1,320-1,340 per tonne
Price basis FOB Huangpu FOB Huangpu
Iron ceiling in the code Fe ≤0.4% Fe ≤0.5%
Aluminium ceiling in the code Al ≤0.4% Al ≤0.5%
Calcium ceiling in the code Ca ≤0.1% Ca ≤0.3%
Spread between the ranges USD 60 per tonne above 553 at both ends Baseline of the pair
Change on the day No figure published No figure published

 

The comparison comes down to USD 60 per tonne at both ends of the two ranges. The number that decides the choice is the calcium ceiling: 441 holds calcium to 0.1% while 553 allows 0.3%, so a specification that cannot take the higher calcium has no option, and one that can take it saves USD 60 a tonne on the same delivery term.

 

What Should I Check Before Ordering Silicon Metal?

 

Seven items carry most of the commercial risk on a lot, and the quotation settles none of them.

 

  • Grade code and full analysis - the code fixes iron, aluminium and calcium only, so the silicon floor and trace elements have to be written into the specification.
  • Size and form - lump, grain or powder with the mesh stated.
  • Packing and unit weight - bag weight, big bag or drum, and whether the load is one lot.
  • Delivery term - FOB Huangpu, so ocean freight, insurance and destination charges sit outside it.
  • Tax and documentation - the quotation is marked tax included, so the invoice and export documents have to match the term agreed.
  • Analysis and sampling - certificate of analysis per lot and the sampling method behind it.
  • Quantity, tolerance and inspection - lot size, quantity tolerance and whether a pre-loading inspection is accepted.

 

One point sits outside the price table entirely. Silicon metal is sold on analysis, and two lots carrying the same code can differ inside the ceilings the code sets. The Silicon Metal 553 page sets out the lowest grade in the sequence; tying payment to the assay, rather than to the code, is what closes that gap.

 

FAQ

 

Table 4. Silicon metal price questions, November 16, 2026

 

Question Answer
What are the silicon metal prices for November 16, 2026? FOB Huangpu: 553 at USD 1,320-1,340, 441 at USD 1,380-1,400, 3303 at USD 1,480-1,500, 421 at USD 1,450-1,480 and 2202 at USD 1,980-2,030 per tonne.
Did silicon metal prices change on November 16, 2026? No change figure is published for any of the five grades. Every line carries a dash and the source holds no earlier reading, so the date stands as five levels with no stated movement.
Why is grade 421 quoted below grade 3303? The record prices 421 at USD 1,450-1,480 and 3303 at USD 1,480-1,500, so 421 sits USD 20-30 below a grade with looser iron and calcium ceilings. The source states the two prices and gives no reason for the order.
What do the four digits in a silicon metal grade mean? They list iron, aluminium and calcium in that order. In 441 that reads 0.4%, 0.4% and 0.1%; in 553 it reads 0.5%, 0.5% and 0.3%. A silicon floor is not part of the code.
Is the silicon metal price FOB or delivered? FOB Huangpu, per metric tonne, in US dollars, with tax included as the source states. Freight, insurance and destination charges are outside the number.
What should I confirm before ordering a silicon metal lot? The grade code and full analysis including the silicon floor, the size and packing, the certificate of analysis with its sampling method, the charges included in the FOB term, the documents, and lot size, tolerance and inspection rights.

 

Key Takeaways

 

  • Five export grades are quoted for November 16, 2026, all FOB Huangpu - 553 USD 1,320-1,340, 441 USD 1,380-1,400, 3303 USD 1,480-1,500, 421 USD 1,450-1,480 and 2202 USD 1,980-2,030 per tonne.
  • No line carries a change figure, so the issue states five levels and no direction.
  • The ladder is not monotonic - 421 is quoted USD 20-30 below 3303 despite its tighter ceilings.
  • 441 sits USD 60 above 553 at both ends, and its calcium ceiling is 0.1% against 0.3%.
  • Silicon floors, size, packing, freight and inspection rights sit outside the quotation.

 

Request a Quote

 

Send the grade code, the size and packing, the quantity and the destination port, and ZhenAn will answer with a quotation written against that specification rather than against a list price. Reach us on WhatsApp: +86 15518824805 or by Email: market@zanewmetal.com.